Welcome to TongFeng
Our service, quality, quick smile from the beginning of everything
Cutting: TongFeng has several different saws to meet "cut to length" requirements.
1. High Volume Cutting
2. Close Tolerance Cutting
3. Large Diameter Cutting
4. Short Lengths
5. Long Lengths Deburring: The cutting process generally leaves "metal burrs" on the cut to length hose. TongFeng uses a wire brush deburring machine to remove burrs and sharp edges from cut lengths.
Degreasing: TongFeng uses a water soluable animal fat lubricant during the manufacturing process. If needed, the tubing can degreased in our ultra-sonic degreasing chambers.
Electro Polishing: Electropolishing stainless steel creates a chrome like appearance. It is accomplished by submerging cut lengths into a chemical electrolyte bath in combination with a rectified electric current. The process removes a small layer of the surface and results in a bright shiny finish.
PVC & Other Coatings TongFeng can also accommodate customers who need to have an extruded plastic covering applied to their tubing. Examples: Clear PVC, Black PVC, High temperature Thermoplastic Copolyester Elastomers, etc.
Braiding Braid is a woven metal cover that can be produced over tubing. TongFeng can also manufacture metal braid over the stripwound metal hose.
We Make TongFeng Tube
TongFeng is a leading manufacturer of flexible metal conduits . Our business philosophy has always been based on quality products, innovative solutions, and service beyond our customers' expectations.
Optical Fiber Protection
TongFeng's flexible metal conduits offer the best protection for optical fibers and cables, providing needed flexibility while protecting optical fibers from crushing, kinking, or heavy tensile loads while limiting the bending radius to prevent fiber damage & optical signal loss.
|
