1. Flexible electrical conduit
Flexible stainless steel conduit

Small bore instrumentation tubing, Flexible metal conduit for optic fibers, Stainless steel strip (square locked or interlocked constructions), very flexible .Stainless steel for Corrosion Resistant *EMI Shielding , Durable and very long life. Most suitable for instrumentation electronics or sensors wiring protections.Flexible Stainless Steel Conduit: Type AT is an ultra-flexible, stainless steel conduit designed primarily for OEM applications. A typical application would be armouring in specialty sensing devices, or medical equipment, including fiber-optics.
　　MADE FROM STAINLESS STEEL STRIPS:
　　ALL Stainless steel construction for corrosion resistant; Durable and long life; Designed for tight-spot installation and where continuous flexing is required
Applications:
　　Suitable for use in Industrial environments. Protection for stainless tubes, sensor cords or electric cords. It is designed to protect sensitive electronic circuits in applications such as sensors, CCTV circuits, electronic instruments and industrial control wirings.Stainless Flexible Protection conduits with PVC Sheathing Or Metal Wire Braiding
For Large Quantity Order, it is possible to Vacuum-Jacket or Extrude a PVC covering onto the above AT-SL (SquareLok Type) conduits for water proof applications.
Flexible metal conduit , Flexible electrical conduit , Stainless steel Flexible conduit Technical Data: SquareLok Style (SL)
SquareLok tubing is produced from a continuous metal strip, and is held in position by locking one leg of one profile over the leg of the adjacent profile.

Size
Inside Diameter
Outside Diameter
Coiling Diameter
Weight
Breaking Load Min
TongFengflex Part Number
5/32”
0.156”
0.235”
1.80”
0.030 lb/ft
145 lbs.
SL-SS-0025
3/16”
0.188”
0.266”
1.80”
0.033lb/ft
150 lbs.
SL-SS-003
7/32”
0.218”
0.303”
1.80”
0.040 lb/ft
155 lbs.
SL-SS-0035
1/4”
0.250”
0.329”
2.0”
0.041 lb/ft
190 lbs.
SL-SS-004
9/32”
0.282”
0.375”
2.0”
0.048 lb/ft
200 lbs.
SL-SS-0045
5/16”
0.313”
0.410”
2.0”
0.055 lb/ft
200 lbs.
SL-SS-005
3/8”
0.375”
0.500”
2.0”
0.088 lb/ft
225 lbs.
SL-SS-006
1/2”
0.500”
0.625”
2.5”
0.106 lb/ft
250 lbs.
SL-SS-008

OD tolerance is +/- 0.008 inches    ID tolerance is +/- 0.015 inches (.4mm)
  Fully InterLok Style (FI) InterLok metal strip and the edges of the strip are completely interlocked with each other.  This offers increased crush protection, and higher axial strength.

Size
Inside Diameter
Outside Diameter
Coiling Diameter
Weight
Breaking Load Min
TongFengflexPart Number
3/16”
0.188”
0.266”
2.0”
0.041 lb/ft
190 lbs.
FI-SS-003
7/32”
0.218”
0.303”
2.0”
0.045 lb/ft
200 lbs.
FI-SS-0035
1/4”
0.250”
0.329”
2.0”
0.046 lb/ft
250 lbs.
FI-SS-004

Back to Top
Desktop Version